A powerful filler for use where substantial filling is required, including wider cracks, deeper crevices, and holes and air pockets in concrete. Use on surfaces such as motar, concrete, A/C sheeting, besser bricks, new and old timber and metal.  Exterior & Interior use.

Available in 500ml, 2Lt

Ready to use,  A fine particle filler ideal for covering minor imperfection over a broad area. Use on plaster, plasterboard, concrete, motar and similar interior surfaces. Easy sanding. Interior use.

Available in 500ml, 2Lt

A smooth filler for interior joinery and walls. Adheres readily to existing gloss and semi gloss painted surfaces. Ideal broad filler for doors, cupboards and walls for a mirror finish. Excellent for grain and edge filling, repairing chips, dents, cracks and scratches, nail and screw holes and filling uneven timber surfaces.  Perfect gloss retention.

Available in 500ml, 2Lt

A quick drying surface filler for interior/exterior application on wood, plaster, brick and concrete. Ideal for reappearing hairline cracks, blemishes, dents and scratches on existing painting surfaces including gloss and semi gloss finished. Particularly suitable where a hard durable, super smooth surface is required such as skirting boards, architraves, door edges etc.  Perfect gloss retention.

Available in: 500ml, 2Lt

A powerful long-lasting mould inhibitor (when added to an existing product e.g. paint) which inhibits the unsightly growth of mould on to the surface it is applied to. Mould Defence forms an enduring film that will not change the look or feel of the substrate to which it is applied.

Mould Defence is recommended to be used in areas where high moisture is present e.g. Bathroom, Laundries and Kitchens, however for peace of mind can be used throughout the whole house.

Mould Defence can be added to a wide range of products including paint (water based and solvent), timber oils/stains, textured coatings, grout, mortar and adhesive.

• Water based and solvent based paints, oils and stains: Add 5mL per L of paint/stain/oil.
• Mortar, Grout, Textured Coatings, Fillers and Adhesives: Add 5mL per kg of ready to use product

Mould Defence is added to the finish prior to applying, it is not to be applied to affected areas on its own.

Ensure the surface the finish is being applied to is clean, and clear of any mould or mildew, this is important as Mould Defence will not kill mould present, however it will stop it from growing back.

Where mould is present, a suitable mould wash must be used prior to applying a finish dosed with Mould Defence

Available in: 20ml 50ml 75ml 100ml 1L

Prep Multihesive is a styrene acrylate, water based multi-purpose adhesive, originally designed to replace PVA adhesives for all building and craft projects.

• Internal / External application
• Non-toxic
• Non flammable
• Dries quickly – dries clear
• Non-flammable
• High water resistance and will not re-emulsify
• Made in Australia

Prep Multihesive will bond almost anything to anything. Bond strength is greatest on porous surfaces such as timber, fabric, leather, paper, styrene foam, metal, wood and even concrete, plaster and fibro. Prep Multihesive is also a suitable adhesive for non-porous surfaces such as steel, aluminium, brass, copper, ceramics and glass.

It will not re-emulsify nor dissolve if subjected to water after drying like PVA's. Prep Multihesive is a thicker emulsion than PVA's so it doesn't drip on vertical surfaces. It has greater bond strength on most surfaces.

Prep Multihesive may also be diluted, for use as a 'dust sealer' or 'primer/sealer' for concrete and masonry surfaces. It may be used diluted as a bonding agent between layers of concrete or in the mix.

Adheres to porous materials, e.g. timber, concrete, brickwork, ceramic, glass, wallpaper, canvas, carpet, fabric, leather, paper and non-porous materials, e.g. most metals and styrene foam.

Available in: 125ml 250ml 500ml 1 lt 4 lt

Prep Linseed Oil Putty is available in four standard colours for almost all situations where a reliable Linseed Oil based putty is required.

• non toxic
• weather resistant
• tough and flexible
• easy to use
• colours - Plain, Honey Oak, Brown, Maple
• Made in Australia

Uses

Applications include window glazing, filling nail holes in furniture, flooring and for general building applications.

Available in:

• Plain, 400gm, 1.5kg, 4kg
• Brown, 400gm
• Honey Oak, 400gm
• Maple, 400gm

• Ready - mixed
• Interior and exterior
• Easy to use
• Heavy duty trade quality
• May be tinted
• May be painted over
• Made in Australia

Uses:

• Ideal for patching timber, plasterboard, cement, floors, walls, ceilings, roofs and many more

  Available in:

• 200gm
• 500gm
• 1kg
• 2kg
• 4kg

Available in a variety of colours for all timber types - natural, oak, pine, teak, jarrah, mahogany, maple, walnut, white, cedar, rimu, hardwood, ebony and brush box.

• Takes stain/paint evenly
• Easy to use
• Dries quickly
• Water clean up
• Made in Australia

Uses

The wood filler is suitable for filling cracks, holes, end grain and edges in timber. Once set, the wood filler can be sanded, screwed and nailed.

Note: May be used Externally if painted over with External paint.

Available in:

• 250gm all colours
• 550gm all colours
• 2kg Pine and Natural

This product is highly water resistant and therefore suitable for Interior and Exterior use

• For Interior/Exterior use
• Dries to a Smooth White finish
• Water resistant
• Non-shrink, non sag
• Easily sanded
• Can be nailed, sawn, screwed or drilled once cured
• May be painted over with either enamel or acrylic coatings when cured
• Made in Australia

Uses

Filling holes and cracks in non-flexible wall linings such as plaster, concrete, timber and wallboard, both internally and Externally.

Available in:

• 200gm
• 500gm
• 1kg
• 2kg
• 5kg

• Safe to use - fast setting
• dries white - dries fast
• very high weather resistance
• unique properties make this product easy to shape and sand and fill
• ideal for schools and craft classes or just having fun
• Made in Australia

Uses

The ideal product for making moulds, carving, filling holes, for sculpting, casting and many other craft applications.

Available in:

• 1kg
• 3kg
• 10kg